Amazon FireStick Infrared IR Repeater Extension Cable Cord Add-On Extender

Description

Amazon FireStick Infrared IR Repeater Extension Cable Cord Add-On Extender

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

Features and further details

——————————-

The Cable Matters Infrared Extender Cable allows you to control your Blu-ray player, CATV box, or other video sources from your TV, even if a soundbar is blocking the IR sensor. It’s perfect for home theater components hidden in a cabinet or closet.

Important Notes

1) Test the cable before securing it with the adhesive backing. 2) Ensure your TV’s USB port provides 5V power, or use a 1-amp USB wall charger. 3) Not compatible with set-top boxes that use RF (radio frequency) signals. 4) Bright sunlight or CFL bulbs may cause interference with IR signals.

Installation Guide

IR Receiver (Larger Head) for a Hand-Held Remote: 1) Place near the TV, within 15 feet of the remote. 2) Has a 30-degree operating range. 3) LED flashes to confirm signal reception. Tip: If the signal isn’t received, check your remote’s battery.

IR Transmitter (Smaller Head) from Source: Position within 5 inches of the source device (e.g., STB, Blu-ray player), Ensure the IR transmitter bulb has a clear line of sight to the device’s IR sensor. Tip: Locate the IR sensor by shining a flashlight on the device.

USB Power Boost: Use a 1-amp USB wall charger if your TV’s USB port doesn’t provide 5V power. The USB Y-cable is 6 feet long.

IR Compatibility: Supports 30-60 KHz receiving frequency. Be aware that CFL bulbs or bright light may cause interference.

Lightweight Extender Cable: Flexible wire is easy to secure. Coil any excess wire with a cable tie.